Agen Resmi Teledyne LeCroy Indonesia
WavePro 7 Zi-A Oscilloscopes
Combining signal fidelity with an architecture that maximizes speed in every performance aspect, the new WavePro 7 Zi-A Series presents a totally new oscilloscope experience from 1.5 to 6 GHz bandwidths. Experience 50 Ω and 1 MΩ inputs for every channel and four inputs into high-speed front end amplifiers and analog to digital converters. Experience the new X-Stream II architecture that provides 10 to 20 times faster long memory performance than any other oscilloscope. Combined with LeCroy’s flexible and deep analysis toolbox, the WavePro 7 Zi-A Series gives an unforgettable experience for the debugging, validation, analysis and compliance testing of electronic designs.Explore WavePro 7 Zi-A
WavePro 715Zi-A (1.5 GHz Bandwidth, 4 Input Channels, 20 GS/s on 2 Ch Max Sample Rate)
Quick Specs
WavePro 725Zi-A (2.5 GHz Bandwidth, 4 Input Channels, 40 GS/s on 2 Ch Max Sample Rate)
Quick Specs
WavePro 735Zi-A (3.5 GHz Bandwidth, 4 Input Channels, 40 GS/s on 2 Ch Max Sample Rate)
Quick Specs
WavePro 740Zi-A (4 GHz Bandwidth, 4 Input Channels, 40 GS/s on 2 Ch Max Sample Rate)
Quick Specs
WavePro 760Zi-A (6 GHz Bandwidth, 4 Input Channels, 40 GS/s on 2 Ch Max Sample Rate)
Check up to three models.
Quick Specs
Freedom from Limitations
WavePro
7 Zi-A excels in the way it offers general purpose utility never before
seen in oscilloscopes from 1.5 to 6 GHz. All WavePro 7 Zi-A
oscilloscopes contain selectable 50 Ω and 1 MΩ input capability. The 4
and 6 GHz models include both ProBus and ProLink input types which means
eight probes can be attached and then multiplexed from the front panel
or by remote control. The result— it's easy to hook up a passive probe
even on 4 or 6 GHz models—no more frustration and hassle of trying to
find a 1 MΩ input adapter. Plus, any existing investment in LeCroy
probes, such as current probes, single-ended or differential active
probes, or high voltage probes, is fully leveraged. Perfect.
More Triggers Isolate More Problems More Effectively
A powerful combination of high bandwidth Edge and 10 different
SMART triggers allow you to isolate the problem quickly and begin to
focus on the cause. Most SMART triggers allow triggering on pulse widths
or features as small as 200 ps. A high-speed serial trigger enables
triggering on up to 2.7 Gb/s serial patterns of up to 80-bits in length.
Built-in hardware clock recovery is also included.
TriggerScan™
TriggerScan
uses high-speed hardware triggering capability with persistence
displays to capture only the signals of interest and provide answers up
to 100X faster that other methods. Traditional fast display update modes
work best on frequent events occurring on slow edge rates while
TriggerScan excels in finding infrequent events on fast edge rates.
WaveScan™ Advanced Search and Analysis Finds Problems that Triggers Won't Find
The best trigger won't find all unusual events—a more powerful
capability is sometimes needed. WaveScan provides the ability to locate
unusual events in a single capture (i.e., capture and search) or "scan"
for an event in many acquisitions over a long period of time. Select
from more than 20 search modes (frequency, rise time, runt, duty cycle,
etc.), apply a search condition and begin scanning. When an event is
found, WaveScan highlights the error on screen and displays a table
listing the errors.
Fully Integrated Mixed Signal Oscilloscope (4+36) Option
Add
Mixed Signal Oscilloscope (MSO) operation using the MS Series mixed
signal options. These convenient add-ons connect to the LeCroy LBUS and
quickly and simply provide capability to acquire up to 36 digital lines
time-correlated with analog waveforms. No time is wasted in trying to
learn how to connect, synchronize or operate a complicated logic
analyzer since the MSOs are already completely integrated into the scope
operation. In addition to acquiring digital lines, they are also
helpful for monitoring low-speed signals, such as serial data clock,
data, and chip select signals, thus preserving the analog channels for
higher speed requirements.
LeCroy — The Acquisition Memory Leader
LeCroy has found a way to make long acquisition memory seamless
and pain free to use. The WavePro 7 Zi Series' proprietary X-Stream II
architecture supports capturing, zooming, measuring and analyzing
multiple waveforms at 256 Mpts deep. What you experience is performance
gains of 10–20X over what is available today. Whether looking at the
acquired signal or while analyzing several screens of statistics,
tracking a frequency or identifying complex patterns the WavePro 7 Zi is
designed to perform.
Instantaneous Responsiveness
The first time you use the Zi oscilloscope you will experience
responsiveness that you've never seen before. Acquiring and manipulating
the longest record lengths and the most complex WaveShape Analysis are
all easily handled at the same time. Whether you use the front panel or
choose to make adjustments with a mouse or the touch screen, the system
performs.
X-Stream II Architecture
Optimized for Fast Throughput
Designed for long memory operation and responsiveness X-Stream
II technology enables high throughput of data—even when the oscilloscope
is performing multiple 100 Mpts waveforms. It does so by eliminating
the trade-offs between long memory length and quick processing. WavePro 7
Zi's proprietary architecture design is augmented with an Intel® Core™ 2
Quad processor, high-speed serial data buses, a 64-bit OS and up to 8
GB of RAM.
Optimized for Long Memory
By using variable waveform segment lengths to improve the CPU
cache memory efficiency the WavePro 7 Zi is designed for the fastest
processing of long waveform records. The result—10-20 times faster
processing compared to other oscilloscopes.
Optimized for Responsiveness
By dynamically allocating buffers where to maximize memory
availability the WavePro 7 Zi Series embodies the fastest front panel
responsiveness. Waveform previewing shows interim calculation results
while a built in processing abort make front panel control changes
instant by stopping the current process and allowing new waveforms to be
positioned or zoomed—all without a lengthy recalculation.
Digital Filter Software Package (WPZi-DFP2)
DFP2 lets you implement Finite or Infinite Impulse Response
filters to eliminate undesired spectral components, such as noise, and
enhances your ability to examine important signal components. You can
choose from a standared set of FIR or IIR filters. You can also design
your own filters.
Spectrum Analyzer Analysis Package (WPZi-SPECTRUM)
The spectrum converts the controls of your oscilloscope to
those of a spectrum analyzer. Adjust the frequency span, resolution and
center frequency. Apply filtering to your signal and watch the frequency
signature change in real time. A unique peak search labels the spectral
components and presents frequency and level in a table. Touch any line
jump to that peak.
Mixed Signal Oscilloscope Option (MS-250/MS-500)
The Mixed Signal option allows the WavePro 7 Zi to convert to a
mixed signal oscilloscope with up to 36 digital channels. Channels are
sampled at 2 GS/s up to 50 Mpts/Ch. Having up to 36 digital inputs
timesynchronized with four analog channels extends the oscilloscope's
use to provide a total system view.
Jitter and Timing Analysis Package
Specialized timing
parameters measure period, cycle-cycle, half period, width, etc. jitter
on a variety of signals. Use the three views of jitter (statistical,
time, and frequency) to understand root cause and to debug problems.
Histograms provide understanding of statistical distributions. Tracks
provide a means to show time-correlated peaks of jitter, and compare to
other signals. FFTs provide the ability to debug root causes of high
in-circuit jitter.
