DPO7000 Digital Phosphor Oscilloscope Series
High-performance Analysis for Complex Digital Designs
Every DPO7000 now comes equipped with probes and important software analysis tools as standard; ideal for getting started on complex signal characterization challenges.
The DPO7000 Digital Phosphor Oscilloscopes contain the high waveform capture rate, advanced triggering, protocol decode and search capabilities needed to debug, characterize and analyze 1st generation serial data, RF, memory and general purpose devices.
Models in the DPO7000 Series:
| Model | Bandwidth | Sample Rate | Record Length | Channels |
|
| DPO7354 | 3.5 GHz | 40/20/10 GS/s | 500/250/125 M | 4 |
|
| DPO7254 | 2.5 GHz | 40/20/10 GS/s | 500/250/125 M | 4 |
|
| DPO7104 | 1 GHz | 40/20/10 GS/s | 250/125/50 M | 4 |
|
| DPO7054 | 500 MHz | 20/10/5 GS/s | 250/125/50 M | 4 |
|
Features | Benefits |
| FastAcq waveform capture | With >250,000 waveforms per second being displayed, quickly find intermittent events like a DDR2 Read or Write that can not be seen with a typical digital oscilloscope. |
| Pinpoint® triggering with low-speed serial trigger | Speed up debug of buses like RS-232, SPI and I2C through standards-specific trigger functions. |
| Bandwidths to 3.5GHz meet a variety of application needs | Accurate signal characterization of standards like 100 BaseT Ethernet at 500 MHz on up to DDR2 at 3.5 GHz. |
| High sample rate on all 4 channels simultaneously | Ensure accurate channel-to-channel evaluation and greater signal visibility for pinpointing timing anomalies with 10 GS/sec sample rate across all 4 channels. |
| Long record length on all 4 channels | Capture up to 500 mega points for accurate jitter measurement, meeting compliance requirements for standards like USB2.0. |
| Serial compliance and analysis options | Simplify compliance verification and debugging of communications system designs such as Ethernet and USB. |
| Large 12.1″ XGA resolution display | Greatly improve visual identification of measurement tasks. |
